Canon imageRUNNER Advance 400
Troubleshooting. Jam Code. Host machine
Host machine
ACC ID | Jam Code | Type | Sensor ID | Sensor Name |
---|---|---|---|---|
00 | 0101 | DELAY | PS12 | Pre-Registration Sensor |
00 | 0201 | STNRY | PS12 | Pre-Registration Sensor |
00 | 0A01 | POWER ON | PS12 | Pre-Registration Sensor |
00 | 0105 | DELAY | PS11 | Registration Sensor |
00 | 0205 | STNRY | PS11 | Registration Sensor |
00 | 0A05 | POWER ON | PS11 | Registration Sensor |
00 | 0107 | DELAY | PS19 | Fixing Paper Sensor |
00 | 0207 | STNRY | PS19 | Fixing Paper Sensor |
00 | 0A07 | POWER ON | PS19 | Fixing Paper Sensor |
00 | 0108 | DELAY | PS5 | Delivery Sensor |
00 | 0208 | STNRY | PS5 | Delivery Sensor |
00 | 0A08 | POWER ON | PS5 | Delivery Sensor |
00 | 010A | DELAY | PS6 | Reverse Sensor |
00 | 020A | STNRY | PS6 | Reverse Sensor |
00 | 0A0A | POWER ON | PS6 | Reverse Sensor |
00 | 010B | DELAY | PS20 | Transparency Sensor |
00 | 020B | STNRY | PS20 | Transparency Sensor |
00 | 0A0B | POWER ON | PS20 | Transparency Sensor |
00 | 010D | DELAY | PS8 | Duplex Feed Sensor |
00 | 020D | STNRY | PS8 | Duplex Feed Sensor |
00 | 0A0D | POWER ON | PS8 | Duplex Feed Sensor |
00 | 0B00 | DOOR OP | - | - |
00 | 0CA0 | SEQ NG *2 | - | - |
00 | 0CF1 | ERROR *1 | - | - |
00 | 0D91 | OTHER | - | - |
00 | FF01 | SEQ NG *2 | - | - |
00 | FF02 | SEQ NG *2 | - | - |
00 | FF03 | SEQ NG *2 | - | - |
00 | FF04 | SEQ NG *2 | - | - |
00 | FF05 | SEQ NG *2 | - | - |
00 | FF06 | SEQ NG *2 | - | - |
00 | FF07 | SEQ NG *2 | - | - |
*1: The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply. If the same jam is detected regardless of the operation above, the error code is displayed. Detected error is either of the following. E010,E014,E110,E197-0000,E197-0001,E261,E805,E822,E820
*2: The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply.