Canon imageRUNNER 1133A
Service Mode. Function. CLEAR 2
E719-CLR
Clearing E719 error
Details | To clear E719 error (communication error with the Card Reader). |
Use case | When removing the Card Reader-F1 |
Adj/set/operate method | 1) Select the item, and then press OK key. 2) Turn OFF/ON the main power switch. |
Related service mode | COPIER> FUNCTION> CLEAR> CARD |
ALL
Clearing setting information
Details | • User mode setting values • Service mode setting values (excluding the service counter) • ID and password of the system administrator • Communication management/print/jam/error log • E719 error (counter meter-installed models only) The following items are not cleared/initialized. • Service counter • Factory adjustment values of the Reader/ADF |
Use case | When replacing the Main Controller PCB |
Adj/set/operate method | 1) Select the item, and then press OK key. 2) Turn OFF/ON the main power switch. |
Related service mode | COPIER> OPTION> BODY> LOCALE, SIZE-LC |
ERDS-DAT
Initialization of Embedded-RDS setting value
Details | To initialize the Embedded-RDS setting values. ON/OFF of Embedded-RDS, UGW (remote monitoring service system) port number, and communication error log set in service mode are initialized. |
Use case | When upgrading the Bootable in the Embedded-RDS environment |
Adj/set/operate method | Select the item, and then press OK key. |
Caution | The method of using the SRAM in Embedded-RDS differs depending on the Bootable version. Therefore, unless initialization is executed at the time of version upgrade, data inconsistency occurs. |
Related service mode | COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, COM-LOG |
Supplement/memo | Embedded-RDS: Function to send device information such as the device counter, failure, and consumables to UGW via SOAP protocol UGW (Universal Gate Way): Remote monitoring service system |