Canon imageRUNNER 1133A

R-CON

Initialization of Reader/ADF

Details	To initialize the factory adjustment values of the Reader/ADF.
Use case	When clearing RAM data of the Main Controller PCB
Adj/set/operate method	Select the item, and then press OK key.

SRVC-DAT

Clearing service mode setting value

Details	To clear the service mode setting values. The user mode setting values are not cleared. The factory adjustment values of the Reader/ADF are not initialized.
Adj/set/operate method	1) Select the item, and then press OK key. 2) Turn OFF/ON the main power switch.

COUNTER

Clearing service counter

Details	To clear the counter by maintenance/part/mode. The numerator printed on a system dump list becomes 0.
Adj/set/operate method	1) Select the item, and then press OK key. 2) Turn OFF/ON the main power switch.

HIST

Clear of logs

Details	To clear the communication management/print/jam/error log.
Use case	When clearing logs
Adj/set/operate method	1) Select the item, and then press OK key. 2) Turn OFF/ON the main power switch.

CARD

Clearing Card Reader connection information

Details	To clear the information on connection of the Copy Card Reader-F1. The data related to the card ID (department) is cleared, and the ID and password of the system administrator are initialized.
Use case	When removing the Card Reader-F1
Adj/set/operate method	When removing the Card Reader-F1 1) Disable the department ID management. 2) Select the item, and then press OK key. 3) Execute E719-CLR. 4) Turn OFF the main power switch. 5) Remove the Card Reader-F1. 6) Turn ON the main power switch.
Caution	• Execute this item after disabling the department ID management via LUI or RUI. • Then, execute E719-CLR (clearing of E719).
Related service mode	COPIER> FUNCTION> CLEAR> E719-CLR