-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Canon imageRUNNER 1021J
Service Mode 01. How to Enter
Operation at the time of Bit SW
- Selecting Service Mode Press the Additionalfunctions key, 2key, 8key, Additional functions key sequentially.
#SSSW
- Press [OK] on the touch panel.
#SSSW
001 000000000
- Selecting a Menu Item Press [OK].
#SSSW
033 000000000
- Selecting a Bit Switch Select the bit using the [left arrow]/[right arrow] on the touch panel.
- Registering/Setting Data Enter data using the keypad, and press the [OK].
- Press the [Stop]/[Additional functions]/[Reset] key to end the service mode.
Operation at the time of Parameter
- Selecting Service Mode Press the Additionalfunctions key, 2key, 8key, Additional functions key sequentially.
#SSSW
- Selecting a Menu Item Select the Menu item using the [left arrow]/[right arrow] on the touch panel.
#NUMERIC Param.
- Press [OK].
#NUMERIC Param.
001 0
- Selecting a Prarameter Select the Prarameter using the [left arrow]/[right arrow].
#NUMERIC Param.
002 0
- Registering/Setting Data Enter data using the keypad, and then press [OK].
# 3 NUMERIC Param.
002 10
- Press the [Stop]/[Additional functions]/[Reset] key to end the service mode.