-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Canon imageCLASS MF6580cx
Troubleshooting. Jam Codes
Jam Codes (Main body)
Code |
Name |
Sensor No. |
Description |
0104 |
Pickup Delay Jam |
SR11 |
After execution of a pickup retry, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time. Or after the duplex drive solenoid (SL1) is on, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time. |
0208 |
Pickup Stationary Jam |
SR11 |
After the registration sensor (SR11) has detected the leading edge of paper, the registration sensor (SR11) does not detect the trailing edge of paper within a specific period of time. |
010c |
Delivery Sensor Delay Jam |
SR5 |
After the registration sensor (SR11) has detected the leading edge of paper, the delivery sensor (SR5) does not detect the leading edge of paper within a specific period of time. |
0210 |
Delivery Sensor Stationary Jam |
SR5 |
- The delivery sensor cannot detect absence of paper within the specified time after turning off of the registration clutch.
- The delivery sensor cannot detect absence of paper within the specified time after the sensor detected the leading edge of paper.
|
0214 |
Stationary jam in machine |
SR5, SR9 |
After the registration sensor (SR11) has detected the trailing edge of paper, the delivery sensor (SR5) does not detect the trailing edge of paper within a specific period of time. |
021c |
Wound Paper Jam at Fuser |
SR5, SR11 |
The delivery sensor (SR5) has detected absence of paper within the prescribed time after it detected presence of paper. |
1118 |
Door open jam |
SR5, SR9, SR11, SW2 |
The door was opened when there was printing paper in the transport path. |
Jam Codes (ADF)
Code |
Name |
Sensor No. |
Description |
0000 |
Unknown jam |
- |
Other errors |
0007 |
Initial stationary |
SR2002, SR2003, SR2004 |
Paper is detected in the transport path before the ADF starts initial operation. |
0008 |
Document edge sensor delay jam |
SR2002 |
The document edge sensor does not detect paper when the paper has been fed by the predetermined distance since reception of a pickup request. |
0009 |
Document edge sensor stationary jam |
SR2002 |
The trailing edge of paper is not detected when the paper has been fed by the predetermined distance since detection of it by the document edge sensor. |
000a |
Paper absence (Pull out the document.) |
SR2001 |
The Document set sensor has been held off since start of pickup. |
000c |
Delivery delay jam |
SR2002 |
In case the internal software signal "Delivery Sensor OFF" set in the system cannot be detected, when the leading edge of paper is detected by the document edge sensor and fed the prescribed distance, and after the paper's trailing edge is detected. |