Canon imageCLASS D1370
Troubleshooting. Special Mode
This product has settings called Special Mode to solve print quality troubles. This function can be executed in the following user mode.
• Menu> Adjust / Maintenance > Special mode
Special mode | Options | Details |
---|---|---|
Special Mode U | OFF ON |
Due to the paper type (for example, heavy paper) or usage conditions (for example, dry conditions), toner smudges and spatters appear on the output. When this occurs, set this setting to <On>. • The print quality may become lower when this setting is enabled, depending on the paper type used (for example, thin paper) or usage conditions (humid conditions). |
Special Mode V | OFF Mode 1 Mode 2 |
If damp paper is used to print, the ejected paper may curl up (the printed side may curl up). In this case, change this setting. the improvement effect is increased in the following order. <Off> -> <Mode 1> -> <Mode 2> (low) (high)
|
Special Mode X (only for media printing and printing from PS/PCL printer driver) (D1370 only) | OFF Mode 1 Mode 2 Mode 3 |
Depending on the paper type or the printing environment, liner ink stains may appear on the printed document. If it happens, change the setting of this item. The improvement effect is increased in the following order. <Off> -> <Mode 1> -> <Mode 2> -> <Mode 3> (Effect: Weak) (Effect: Strong)
|
Special Mode Z (only for copying) | OFF Mode 1 Mode 2 Mode 3 |
Due to the paper type or usage conditions, vertical streaks appear on the output. When this occurs, change this setting. <Off> -> <Mode 1> -> <Mode 2> -> <Mode 3> (low) (high)
|
Special Mode B | OFF Mode 1 Mode 2 Mode 3 |
Vertical streaks appear on the output after the toner cartridge was replaced recently, or the machine has not printed anything for an extended period of time. When this occurs, change this setting. The effect becomes greater as the number goes up. <Off> -> <Mode 1> -> <Mode 2> -> <Mode 3> (low) (high)
|
Special Mode C (only for printing received fax and report printing) | OFF ON |
Due to the paper type or usage conditions, vertical streaks appear on the output. When this occurs, set one of the following settings to <On>. Noise can also be minimized.
|
Special Mode D | OFF ON |
|
Special Mode G | OFF ON |
Depending on the paper type (rough-textured paper, especially 16K size), the output capacity may deteriorate. When this occurs, change the setting to <On>.
|