Canon iRC6880N
Troubleshooting. Jam Codes ADF-related
Jam Code (ADF-related)
Code | Sensor | Sensor | Description |
---|---|---|---|
0001 | post-separation sensor | PI7 | The post separation sensor does not detect paper even when paper has been fed 452 mm after the start of separation. |
0002 | post-separation sensor | PI7 |
|
0003 | registration sensor | PI1 | the registration sensor does not detect paper even when paper has been fed 134.8 mm after the post-separation sensor has gone on. |
0004 | registration sensor | PI1 | the read sensor goes off before the registration sensor goes off. |
0005 | read sensor | PI8 |
|
0006 | read sensor | PI8 |
|
0007 | delivery reversal sensor | PI9 |
|
0008 | delivery reversal sensor | PI9 | delivery reversal sensor the delivery sensor detects paper after paper has been fed 161.9 mm from the end of reading the trailing edge. |
0042 | post-separation sensor | PI7 | a jam (1st sheet) is detected by the post-separation sensor. |
0043 | registration sensor | PI1 | paper (1st sheet) fails to reach the registration sensor. |
0044 | registration sensor | PI1 | a stationary jam (1st sheets) is detected by the registration sensor. |
0045 | read sensor | PI8 | paper (1st sheet) fails to reach the read sensor. |
0046 | read sensor | PI8 | a stationary jam (1st sheet) is detected by the read sensor. |
0047 | delivery reversal sensor | PI9 | paper (1st sheet) fails to reach the delivery sensor. |
0048 | delivery reversal sensor | PI9 | a stationary jam (1st sheet) is detected by the delivery sensor. |
0071 | timing fault | - | timing of software operation is faulty. |
0073 | timing fault | - | the shift motor has a fault. |
0090 | ADF open/closed sensor 1 | PS502 | the ADF is opened while the machine is in operation. |
0091 | ADF open/closed sensor 1 | PS502 | the ADF is opened while the machine is in operation (waiting for paper). |
0092 | DF cover open/closed sensor | PI6 | the cover is opened while the machine is in operation (drive system in operation). |
0093 | DF cover open/closed sensor | PI6 | the cover is opened while the machine is in operation (waiting for paper). |
0094 | registration sensor, separation sensor, feed sensor, delivery reversal sensor | PI1,PI7,PI8,PI9 | paper is detected within the path during pickup of the 1st sheet. |
0095 | original placement sensor, DF cover open/closed sensor, ADF open/closed sensor 1 | PI5,PI6,PS502 | there is no paper in the tray, or the pickup start signal is received with the machine being in an open state. |