Canon i-SENSYS MF112
Service Mode. Overview
Engine Test Print
This machine has an engine test print function to check whether the printer engine is operating normally.
NOTE:
In the case of engine test print, a test print can be performed by using only the Engine Controller.
- Load A4/LTR paper in the Multi-purpose Tray.
- Open/close the Cartridge Door 4 times or more within 5 seconds.
- An engine test print is executed, and the test pattern as shown below is printed.
Service Mode Menu
- COPIER
Service mode for copier- DISPLAY
State display mode - I/O
I/O display mode - ADJUST
Adjustment mode - FUNCTION
Operation / inspection mode - OPTION
Specification setting mode - COUNTER
Counter mode
- DISPLAY
- FEEDER
ADF service mode- ADJUST
Adjustment mode - FUNCTION
Operation / inspection mode
- ADJUST
- FAX
FAX service mode- SSSW
Bit switch registration mode - MENU
Menu switch registration mode - NUM
Numeric parameter setting mode - NCU
NCU parameter setting mode (Service adjustment is not available.
- SSSW
- TESTMODE
Service mode for test print, operation check, etc.- SYSTEM
System test mode - SCAN
Scan test mode - FAX
FAX test mode - PANEL
Touch panel test mode
- SYSTEM
- NET WORK
Net work test mode