Canon Satera MF7450N
Service Mode. 06 PRINT
No. | Initial setting | Range setting | Explanation | |
---|---|---|---|---|
#PRINT SW | SW01 - SW04 | Not used | ||
SW05 | 10000000 | Horizontal scanning priority record | ||
SW06 - SW13 | Not used | |||
SW14 | 00000000 | Special mode setting | ||
SW15 | 00000000 | Delivery setting | ||
SW16 - SW17 | ||||
SW18 | Fixing temperature adjustment resolution setting | |||
SW19 - SW50 | Not used | |||
#PRINT NUMERIC | 01: - 30: | Not used | ||
31: | 50 | 0 to 100, one unit = 0.1 mm | Top registration adjustment (manual paper feed tray) | |
32: | 50 | 0 to 100, one unit = 0.1 mm | Top registration adjustment (cassette) | |
33: | 50 | 0 to 100, one unit = 0.1 mm | Top registration adjustment (duplex unit) | |
34: | 100 | 0 to 200, one unit = 0.1 mm | Left-end registration adjustment (manual paper feed tray) | |
35: | 100 | 0 to 200, one unit = 0.1 mm | Left-end registration adjustment (cassette 1) | |
36: | 100 | 0 to 200, one unit = 0.1 mm | Left-end registration adjustment (cassette 2) | |
37: | 100 | 0 to 200, one unit = 0.1 mm | Left-end registration adjustment (cassette 3) | |
38: | 100 | 0 to 200, one unit = 0.1 mm | Left-end registration adjustment (cassette 4) | |
39: | 100 | 0 to 200, one unit = 0.1 mm | Left-end registration adjustment (duplex unit) | |
40: - 44: | Not used | |||
45: | 16 | 0 to 30, 1 unit = 0.4% | Fixing film speed adjustment (manual paper feed tray) | |
46: | 16 | 0 to 30, 1 unit = 0.4% | Fixing film speed adjustment (cassette) | |
47: - 52: | Not used | |||
53: | 0 | 0 to 9999, one unit = 5 deg C | Adjustment of margin at leading edge of copy | |
54: | 0 | 0 to 9999, one unit = 5 deg C | Adjustment of margin at trailing edge of copy | |
55: | 0 | 0 to 9999, one unit = 5 deg C | Adjustment of margin at right edge of copy | |
56: | 0 | 0 to 9999, one unit = 5 deg C | Adjustment of margin at left edge of copy | |
57: | Not used | |||
58: | 100 | 85 to 115, one unit = 0.5 mm | Adjustment of the registration loop volume (Manual feed tray) | |
59: | 100 | 85 to 115, one unit = 0.5 mm | Adjustment of the registration loop volume (Cassette) | |
60: | 100 | 85 to 115, one unit = 0.5 mm | Adjustment of the registration loop volume (Optional cassette) | |
61: | 100 | 85 to 115, one unit = 0.5 mm | Adjustment of the registration loop volume (Duplex unit) | |
62: | 7 | 0 to 14, one unit = 5 deg C | Temperature adjustment UP/DOWN mode (For plain paper) | |
63: | 7 | 0 to 14, one unit = 5 deg C | Temperature adjustment UP/DOWN mode (For rough paper) | |
64: | 0 | 0 to 5 | Mode for preventing the temperature rise of the end | |
65: | 0 | 0 to 3 | Mode for reducing sand image | |
66: | 0 | 0 to 3 | Temperature/ Humidity sensor fixed mode | |
67: - 70: | Not used | |||
No. | Initial setting | Range setting | Explanation | |
#PRINT CST |
U1 | 0 | 0: G_LTR | Paper size group U1 special, standard-size paper entry |
29: A-LTR | ||||
31: G-LTR | ||||
40: 8K | ||||
U2 | 0 | 0: FLSP | Paper size group U2 special, standard-size paper entry | |
24: FLSP | ||||
26: OFI | ||||
27: E-OFI | ||||
28: B-OFI | ||||
36: A-OFI | ||||
37: M-OFII | ||||
39: 16K | ||||
U3 | 0 | 0: G-LGL | Paper size group U3 special, standard-size paper entry | |
25: AFLS | ||||
32: GLTRR | ||||
30: ALTRR | ||||
35: FORIO | ||||
34: G-LGL |