Canon Satera MF7450N
Service Mode. 01 Outline
Service Mode contains the following service data items. Each service data can be viewed or modified using the menu items displayed on the screen.
#SSSW
Use it to register/set basic fax functions (e.g., error control, echo remedy, communication error correction). Use it to make settings related counter functions.
#MENU
Use it to register/set items related to functions needed at time of installation (e.g., NL equalizer, transmission level).
#NUMERIC PARAMETER
These setting items are for inputting numeric parameters such as the various conditions for the RTN signal transmission.
#SPECIAL
These setting items are for telephone network control functions
#NCU
These setting items are for telephone network control functions such as the selection signal transmission conditions and the detection conditions, for the control signals sent from the exchange.
#SCAN
These setting items are for image adjustment in scanning.
These setting items are for image adjustment in printer assembly and for special mode for the field-related measures.
#NETWORK
Use it to confirm the contents of the installed CA certificates.
#SYSTEM
These are used for the import/export of user information through USB.
#ACC
Register the accessories.
#COUNTER
Use it to check estimates for maintenance/parts replacement.
#LMS
Use it to set the inactivity of the transmitted license and the license inactivity without transmitting.
#E-RDS
This is a setting items related to e-RDS (Embedded RDS).
#REPORT
Use it to generate reports on various service data.
#DOWNLOAD
Use it to download firmware to the ROM of a PCB in question.
#CLEAR
Use it to reset various data to initial settings.
#ERROR DISPLAY
An error code is displayed when a service error has occurred.
#ROM
Displays ROM information, such as version numbers and checksums.
#TEST MODE
Makes various status checks, such as contact sensor, sensor and print status.