Canon MF9100
Service Mode. TESTMODE 2
SCAN
SENSOR
| TESTMODE > SCAN > ADJUST | |
|---|---|
| Checking Sensor | |
| Sub item | Description |
| HP-SENS | Home position sensor 1: HP, 0: anything other than HP |
| TP-SENS | Sensor for paper in tray 1: presence of paper, 0: no paper |
| REG-SENS | Pre-registration sensor 1: presence of paper, 0: no paper |
| ESS-SENS | Front door sensor 1: ON, 0: OFF |
ADFTEST
| TESTMODE > SCAN > ADFTEST | |
|---|---|
| ADF Feeding Test Execute feeding operation according to the scanning feeding speed (specified in SPEED, 2-SIDE, COUNT) |
|
| Sub item | Description |
| SPEED | Not used |
| 2-SIDE | Select ON/OFF for duplex mode |
| COUNT | Not used |
| START | Start feeding |
BOOKFEED
| TESTMODE > SCAN > BOOKFEED | |
|---|---|
| Testing Book Feed Operation | |
| Sub item | Description |
| PAGE | Display the number of pages that had been book-fed |
| START | Start book feeding |
| TESTMODE > PRINT | |
|---|---|
| Printing PG pattern | |
| Sub item | Description |
| PG-TYPE | Enter PG number |
| COUNT | Enter the number to be output |
| PHASE | Select 1-sided/2-sided |
| MODE | Not used |
| THRU | Not used |
| DENS-M | Not used |
| DENS-C | Not used |
| DENS-Y | Not used |
| DENS-K | Not used |
| COLOR-M | Selection for each color is available The selected color (ON) is to be output. Setting value: 1: ON, 0: OFF |
| COLOR-Y | Selection for each color is available The selected color (ON) is to be output. Setting value: 1: ON, 0: OFF |
| COLOR-C | Selection for each color is available The selected color (ON) is to be output. Setting value: 1: ON, 0: OFF |
| COLOR-K | Selection for each color is available The selected color (ON) is to be output. Setting value: 1: ON, 0: OFF |
| SIZE | Display paper size |
| PAPER | Display presence/absence of paper |
| MATERIAL | Display paper type |
| FACE UP DOWN | Not used |
| FEED | Selection for the pickup position |
| START | Start PG pattern print Execute output that has been selected above by pressing it. |