#CLEAR |
Item |
Level2 |
Function |
TEL & USER DATA |
|
Use it to clear all areas under user registration/setting. |
SERVICE DATA |
|
Use it to clear the counters (numerator), date, and start data form the system dump list. |
COUNTER |
|
Use it to clear the maintenance/parts counter data and each mode counter data. |
SOFT-CNT |
|
Not used. |
TYPE |
|
Use it to clear the user data and the service data by specified settings. |
HST |
ACTIVITY |
Use it to clear the contents of the communications control report. |
ACCOUNT |
Use it to clear each print history. |
JAM |
Use it to clear the contents of the jam history. |
ERR |
Use it to clear the contents of the error (E code) history. |
ALARM |
Use it to clear the contents of the alarm history. |
ENVIROMENT |
Initializes the enviroment log data. |
CARD |
|
Use it to clear the control cars error data. |
ERR |
E355 |
Not used. |
E719 |
Use it to clear the management information at the time of card reader removal. |
PWD |
|
Use it to clear the system administrator's password. |
FILE SYSTEM*1 |
|
Delete unnecessary language files in the USB memory. |
FORMAT*1 |
USB MEMORY |
Format the USB memory. (This mode is used when the USB memory error is damaged and E744 occurs.) |
LICENSE DRIVE |
Not used. |
CA-KEY |
|
Initializes an installed CA certification. |
ERDS-DAT |
|
The settings related to e-RDS are cleared to the factory settings. |
ALL |
|
Clears user and service data (except for some scan parameters and print parameters), and the counter setting/registration data in the system dump list, except for the print count. |