Brother MFC8810DW
Troubleshooting. 2. Paper Feeding Problems 2
End users can solve problems related to paper feeding as long as they follow the User Check items. If the problem still cannot be solved, implement each procedure according to the step number in the tables below.
2.3 Paper is fed at an angle
User Check
- Check that the paper is set in each paper tray correctly.
- Adjust the paper guide according to the paper size.
- Check that the thickness of the paper is 60 to 105 g/m2. (60 to 163 g/m2 for MP tray)
- Check that there is not too much paper set in each tray.
Step | Cause | Remedy |
---|---|---|
1 | Registration clutch failure | Replace the registration clutch. |
2 | Main PCB failure | Replace the main PCB ASSY. |
2.4 Paper is curled
User Check
- Select "Reduce Paper Curl" in the driver.
- Check that the thickness of the paper is 60 to 105 g/m2. (60 to 163 g/m2 for MP tray)
2.5 Only single surface is printed in duplex printing mode
User Check
- Rotate the paper 180° in the paper tray, and retry printing.
- Flip through the paper and reset it in the tray.
- Set the driver setting to duplex printing.
- Use A4 or Letter-size paper.
Step | Cause | Remedy |
---|---|---|
1 | Duplex solenoid failure | Replace the duplex solenoid. |
2 | Main PCB failure | Replace the main PCB ASSY. |