-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Brother MFC5890CN
Maintenance Mode 1. How to Enter
- Press the Menu and Black Start (Mono Start) keys in this order. Next press the ▲ key four times to switch the machine to the maintenance mode.
The machine beeps for approx. one second and displays "■■ MAINTENANCE ■■■" on the LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in which the machine is ready to accept entry from the keys.
TIP:
Models with numerical keypad on the control panel can enter the maintenance mode in the same way as conventional models; that is, by pressing the Menu, *, 2, 8, 6 and 4 keys in this order.
- To select one of the maintenance-mode functions listed, enter the corresponding 2-digit function code with the numerical keys on the control panel.
NOTES
- To exit from the maintenance mode and switch to standby, press the 9 key twice in the initial stage of the maintenance mode.
- Pressing the Stop/Exit key after entering only one digit restores the machine to the initial stage of the maintenance mode.
- If an invalid function code is entered, the machine resumes the initial stage of the maintenance mode.