Brother MFC1810
Troubleshooting. 2.1 No paper is fed from the paper tray.
User Check
- Check that the paper is set in the paper tray correctly.
- Check that there is not too much paper set in the paper tray.
- Flip over the paper in the paper tray or rotate the paper 180 degrees.
- Check that the thickness of the paper is within the standard.
- Check that the size of the paper is within the standard.
- Flip through the paper and reset it in the paper tray.
Step | Cause | Remedy |
---|---|---|
1 | Foreign object inside the machine | Remove the foreign object. |
2 | Gears around the plate up plate coming off | Reattach gears around the plate up plate. |
3 | Attachment failure of the motor drive belt | Reattach the motor drive belt. |
4 | Attachment failure of the laser shutter arm | Reattach the laser shutter arm. |
5 | Connection failure of the main motor harness | Reconnect the main motor harness. |
6 | Connection failure of the motor encoder PCB flat cable | Reconnect the motor encoder PCB flat cable. |
7 | Connection failure of the pick-up solenoid harness | Reconnect the pick-up solenoid harness. |
8 | Motor drive belt failure | Replace the motor drive belt. |
9 | Motor encoder PCB failure | Replace the motor encoder PCB ASSY. |
10 | Low voltage power supply PCB failure | Replace the low voltage power supply PCB unit. |
11 | Laser unit failure | Replace the laser unit. |
12 | Main PCB failure | Replace the main PCB ASSY. |