Brother MFC-L8650CDW
Troubleshooting. 2.6. Paper is fed at an angle
User Check
- Check if the paper is loaded into each paper tray correctly.
- Turn back the paper loaded in each paper tray or change the orientation of the paper by 180°.
- Adjust the paper guide corresponding to the paper size.
- Check if the thickness of the paper is 60 to 105 g/m2. (60 to 163 g/m2 for MP tray.)
- Check that too much paper is not loaded in the paper tray.
- Check whether the paper type is appropriate.
- Clean each paper pick-up roller.
- Check if only the one side of the envelope lever is lowered.
Step | Cause | Remedy |
---|---|---|
1 | Uneven worn-out of each paper pick-up roller | Replace the appropriate PF kit. |
2 | Paper feed unit failure | Replace the paper feed unit. |
3 | Main PCB failure | Replace the main PCB ASSY. |