Brother MFC-L8610CDW
Maintenance Mode 2. Functions List
Function code | Function |
---|---|
01 | Initialize EEPROM parameters |
03 | Transition to shipping state |
08 | ADF performance test |
09 | Print quality test pattern |
10 | Set worker switches (WSW) |
11 | Print worker switch (WSW) setting data |
12 | Check LCD operation |
13 | Check control panel key operation |
18 | Save the NetConfig information |
25 | Display software version |
32 | Check sensor operation |
33 | Display LAN connection status |
43 | Set PC print functions |
45 | Change USB No. return value / Switching Dither Pattern / Change ON/OFF setting of Direct Print Color mode- Improve Gray Color / Switching of timing to execute Auto Registration / Adjust left-end print position / Adjust upper- end print position / Change of the transfer current setting / Change of ghost reduction setting |
46 | Adjust printable range for each speed level |
53 | Transfer received fax data / log information (fax models only) |
54 | Fine-tune scanning position |
55 | Acquire white level data and set CIS scan area |
61 | Adjust touch panel |
66 | Adjustment of color registration (Adjustment of inter-color position alignment) |
67 | Continuous print test |
68 | Laser unit test pattern print |
69 | Print frame pattern (single-side printing) |
70 | Print frame pattern (duplex printing) |
71 | Color test pattern |
72 | Sensitivity adjustment of density sensor |
73 | Continuous adjustments of density / registration sensor |
74 | Configure for country / region and model |
77 | Print maintenance information |
78 | Check fan operation |
79 | Delete fax data |
80 | Display machine log information |
82 | Display machine error code |
83 | Developing bias voltage correction |
87 | Send communication log information to telephone line |
88 | Reset counters for consumable parts |
91 | Initialize EEPROM parameters |
99 | Quit maintenance mode |