Brother MFC-L8600CDW
Troubleshooting. 2.8. Unable to perform 2-sided printing
User Check
- Firmly close the back cover.
- Firmly set the paper tray.
- Set the driver setting to 2-sided printing.
- Use the paper equal to or larger than Letter size or A4 size. (Use paper specified in each country setting.)
Step | Cause | Remedy |
---|---|---|
1 | Eject actuator coming off | Re-assemble the eject actuator |
2 | Back cover failure | Replace the back cover. |
3 | Eject sensor failure | Replace the eject sensor PCB ASSY. |
4 | Paper eject origin sensor failure | Replace the paper eject origin sensor. |
5 | Paper eject ASSY failure | Replace the paper eject ASSY. |
6 | Main PCB failure | Replace the main PCB ASSY. |