Brother MFC-J497DW
Maintenance Mode. 01, 91. EEPROM Parameter Initialization
EEPROM Parameter Initialization (Maintenance mode 01, 91)
Function
This function initializes the parameters, user switches and worker switches settings registered in the EEPROM, to the initial values. Entering Maintenance mode 01 initializes almost all of the EEPROM areas, but entering Maintenance mode 91 does not initialize some areas, as listed below.
Data item | 01 | 91 |
---|---|---|
Maintenance-mode functions User switches Remote activation code Assurance mode switch settings Outside line number |
All of these will be initialized. | These will be initialized. |
Maintenance-mode functions Worker switches Activity report Station ID data Telephone function registration Speed dialing Group dialing Call transfer data |
These will not be initialized. | |
EEPROM customizing code (4-digit) | This will not be initialized. |
Operating Procedure
- Press the 0 and 1 keys in this order to display "SELECT 01?" on the LCD (or press the 9 and 1 keys in this order according to your need to display "SELECT 91?") in the initial stage of the maintenance mode.
- Press the Mono Start or Black Start key. The "PARAMETER INIT" appears on the LCD.
- Upon completion of parameter initialization, the machine returns to the initial stage of the maintenance mode.