Brother HL3160CDW
Troubleshooting. 2.7 Unable to perform 2-sided printing
User Check
• Close the back cover completely.
• Close the T1 completely.
• Set the driver setting to 2-sided printing.
• Use A4 or Letter paper specified by the manufacturer.
| Step | Cause | Cause |
|---|---|---|
| 1 | Eject actuator coming off | Reattach the eject actuator. |
| 2 | Back cover failure | Replace the back cover. |
| 3 | Duplex clutch failure | Replace the paper feed unit. |
| 4 | Duplex unit failure | Replace the duplex unit. |
| 5 | Eject sensor failure | Replace the eject sensor PCB. |
| 6 | Paper eject ASSY failure | Replace the paper eject ASSY. |
| 7 | Main PCB failure | Replace the main PCB. |