Brother HL3160CDW
Troubleshooting. 2.2 No paper feeding from manual feed slot
User Check
• Check that the paper is set into the deepest part of the manual feed slot.
• Check that multiple sheets of paper are not set in the manual feed slot.
• Check that the thickness of the paper is 60 to 163 g/m2.
• Check that the T1 is not set as the pick-up tray.
• Check that the T1 is closed correctly.
| Step | Cause | Cause |
|---|---|---|
| 1 | Manual feed paper actuator coming off | Reattach the manual feed paper actuator. |
| 2 | Connection failure of the manual feed paper empty/regist rear/ regist front sensor harness | Reconnect the manual feed paper empty/ regist rear/regist front sensor harness. |
| 3 | Manual feed paper empty/regist rear/regist front sensor PCB failure | Replace the paper feed unit. |
| 4 | Paper feed drive unit failure | Replace the paper feed drive unit. |
| 5 | Damaged fuser unit | Replace the fuser unit. |
| 6 | Main PCB failure | Replace the main PCB. |