Brother HL-L2366DW
Troubleshooting. 2.4 Paper becomes wrinkled
User Check
• Check that the paper is set in each paper tray correctly.
• Flip over the paper in each paper tray or rotate the paper 180°.
• Adjust each paper guide according to the paper size.
• Check that the thickness of the paper is 60 to 105g/m2. (60 to 163g/m2 for manual feed slot)
• Check that the paper is not damp.
• Check that there is no dust stuck to the fuser unit.
• Check that the type of paper is appropriate.
Step | Cause | Remedy |
---|---|---|
1 | Fuser unit failure | Replace the fuser unit. |
2 | Damaged gears in the ejecting system | Replace the main frame L ASSY. |