Brother DCP9040CN
Maintenance Mode 2. Functions List
Function Code | Function |
---|---|
01 | EEPROM Parameter Initialization |
05 | Printout of Scanning Compensation Data |
06 | Placement of Scanner Unit Position for Transportation |
08 | ADF Performance Test |
09 | Test Pattern |
10 | Worker Switch (WSW) Setting |
11 | Printout of Worker Switch Data |
12 | Operational Check of LCD |
13 | Operational Check of Control Panel Button |
25 | ROM Version Check |
31 | Drum Unit Cleaning |
32 | Operational Check of Sensors |
45 | Switching of the USB Transfer Speed in the PictBridge Mode |
52 | EEPROM Customizing (User-accessible) |
53 | Received Data Transfer Function |
54 | Fine Adjustment of Scan Start/End Positions |
55 | Acquisition of White Level Data |
66 | Adjustment of Color Registration |
67 | Paper Feeding and Ejecting Test |
72 | Sensitivity Adjustment of Density Sensor (Don’t use) |
74 | EEPROM Customizing |
75 | Sensitivity Adjustment of Registration-mark Sensor |
78 | Operational Check of Fans |
80 | Display of the Machine’s Log |
82 | Error Code Indication |
83 | Developing Bias Voltage Correction |
87 | Output of Transmission Log to the Telephone Line |
91 | EEPROM Parameter Initialization |
99 | Exit from the Maintenance Mode |
--- | Cancellation of the Memory Security Mode (Not applicable to the Japanese version) |
* The functions shaded in the table above are user-accessible.