Brother DCP9015CDWE
Troubleshooting. 2.7 Unable to perform 2-sided printing
User Check
- Firmly close the back cover.
- Firmly install the paper tray.
- Set driver to 2-sided printing.
- Use the paper equal to or larger than Letter size or A4 size. (Use paper specified in each country setting.)
Step | Cause | Remedy |
---|---|---|
1 | Eject actuator catching on some position | Re-assemble the eject actuator. |
2 | Back cover failure | Replace the back cover. |
3 | Duplex tray failure | Replace the duplex tray. |
4 | Back cover sensor failure | Replace the back cover sensor harness ASSY. |