-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Brother DCP1610W
Troubleshooting. Other Problems
Machine does not turn ON
User Check
- Plug the AC cord into a socket.
Step |
Cause |
Remedy |
1 |
Connection failure of the panel flat cable |
Reconnect the panel flat cable. |
2 |
Connection failure of the LCD flat cable |
Reconnect the LCD flat cable. |
3 |
Connection failure of the low voltage PCB harness |
Reconnect the low voltage PCB harness. |
4 |
Panel PCB failure |
Replace the panel PCB ASSY. |
5 |
LCD failure |
Replace the LCD. |
6 |
Low voltage power supply PCB failure |
Replace the low voltage power supply PCB unit. |
7 |
Main PCB failure |
Replace the main PCB ASSY. |
Main motor failure
Step |
Cause |
Remedy |
1 |
Connection failure of the main motor harness |
Reconnect the main motor harness. |
2 |
Low voltage power supply PCB failure |
Replace the low voltage power supply PCB unit. |
3 |
Main PCB failure |
Replace the main PCB ASSY. |
Unusual noise is coming from the machine
User Check
- Check that the covers are closed.
Step |
Cause |
Remedy |
1 |
Possible cause differs depending on the location. Identify the location with the problem first. |
When the location with the problem is identified, check if there is a foreign object around that location (replace the part if necessary). |
2 |
Insufficient grease on parts |
Re-grease the parts. |
3 |
Bent or defective part |
Replace the part. |
Memory failure
User Check
- Print the print data stored in the memory.
- Reduce the complexity or resolution of the data.
- Divide the print data and print them separately.
Step |
Cause |
Remedy |
1 |
Main PCB failure |
Replace the main PCB ASSY. |
Print failure
User Check
- Check that the maximum printable page number has not been exceeded.
- Reduce the complexity or resolution of the data.
Step |
Cause |
Remedy |
1 |
Main PCB failure |
Replace the main PCB ASSY. |
Fan not rotate
User Check
- Check that the maximum printable page number has not been exceeded.
- Reduce the complexity or resolution of the data.
Step |
Cause |
Remedy |
1 |
Harness connection failure of the fan |
Check the harness connection of the fan and reconnect it. |
2 |
Fan failure |
Replace the fan. |
3 |
Main PCB failure |
Replace the main PCB ASSY. |