Brother DCP-T310
Maintenance Mode 2. Functions List
Maintenance Mode | Function |
---|---|
01 | EEPROM Parameter Initialization |
02 | Creating of Head Calibration Data and Writing it into Flash ROM |
08 | ADF Performance Test |
09 | Printout of Test Pattern |
10 | Worker Switch (WSW) Setting |
11 | Printout of Worker Switch (WSW) Data |
12 | Operational Check of LCD |
13 | Operational Check of Keys on Control Panel |
28 | Updating of Firmware Using an External Memory |
32 | Sensor Operational Check |
37* | Printout of Dial Log |
46 | Backup of Machine Information |
53 | Transfer of Received FAX Data and/or Equipment's Log |
54 | Fine Adjustment of Scanning Position |
55 | Acquisition of White/Black Level Data |
56 | Periodic Purge Time Setting |
57 | Cartridge IC Communication Check |
58 | Updating of Paper Feeding Correction Values |
59 | Checking of CIS Travel and Setting of CIS Type |
61 | Printout of PRN/JPEG Files in External Memory |
63 | Move of the Head/Carriage Unit to the Adjustment Position |
65 | Adjustment of Software Correction for Inclination/Corrugation/ Ruled Lines |
66 | Adjustment of Margins in Borderless Printing |
68 | Updating of Head Property Information and Backup/ Restoration of Head Calibration Data |
69 | Traveling Speed Check of Head/Carriage Unit |
74 | Customizing Destinations |
75 | The head/carriage unit will move to the center of its travel. |
76 | Purge Operation |
77 | Print of the Maintenance Information |
78 | Adjustment of Touch Panel |
80 | Display of the Equipment's Log |
82 | Equipment Error Code Indication |
87 | Output of Transmission Log to the Telephone Line |
88 | Assurance Mode Switch Setting (AMS) |
91 | EEPROM Parameter Initialization |
99 | Exit from the Maintenance Mode |
Shaded maintenance mode operations are available to end users.
* Maintenance mode accessible to end users only.