Brother DCP-L6600DW
Troubleshooting. 2.4 No paper is fed from MP tray
User Check
• Check that the paper is set in the MP tray deeply.
• Check that the thickness of the paper is 60 to 200 g/m2.
• Check that the paper tray is not set as the paper tray.
Step | Cause | Remedy |
---|---|---|
1 | MP roller holder ASSY attachment failure | Reattach the MP roller holder ASSY correctly. |
2 | Connection failure of the paper feed motor harness | Reconnect the paper feed motor harness. |
3 | Connection failure of the MP paper empty sensor harness | Reconnect the MP paper empty sensor harness. |
4 | Connection failure of the MP solenoid harness | Reconnect the MP solenoid harness. |
5 | MP paper empty actuator coming off | Reattach the MP paper empty actuator. |
6 | Connection failure of the registration front/rear sensor harness | Reconnect the registration front/rear sensor harness. |
7 | Connection failure of the relay front harness | Reconnect the relay front harness. |
8 | Connection failure of the HVPS flat c | Reconnect the HVPS flat cable. |
9 | Abrasion of the MP paper pick up roller | Replace the PF kit MP. |
10 | MP solenoid failure | Replace the MP solenoid. |
11 | MP paper empty sensor failure | Replace the MP paper empty sensor PCB ASSY. |
12 | Registration front/rear sensor PCB failure | Replace the registration front/rear sensor PCB ASSY. |
13 | Paper feed motor failure | Replace the paper feed motor. |
14 | Damaged fuser unit | Replace the fuser unit. |
15 | Relay front PCB failure | Replace the relay front PCB ASSY. |
16 | High-voltage power supply PCB failure | Replace the high-voltage power supply PCB ASSY. |
17 | Main PCB failure | Replace the main PCB ASSY. |