PrintCopy.info service

Sharp MX2700G

Error Codes List page 2

  • Code: A0-21
  • Description: Machine level error (PCU detection)
    Combination error between the machine production/ remodeling and the firmware
  • Causes: Combination error between the machine production/ remodeling and the firmware
  • Remedy: Check the combination between the machine production/remodeling and the firmware.
  • Code: A0-22
  • Description: Machine level error (SCU detection)
    Combination error between the machine production/ remodeling and the firmware
  • Causes: Combination error between the machine production/ remodeling and the firmware
  • Remedy: Check the combination between the machine production/remodeling and the firmware.
  • Code: CE-00
  • Description: Communication error other than CE- 01 – 08
    Another communication error occurs.
  • Causes: Network cable connection trouble
  • Remedy: Check to insure that the network cable is securely connected.
  • Code: CE-01
  • Description: Network controller trouble
    Network controller and its peripheral circuit trouble
  • Causes: Network controller and its peripheral circuit trouble
  • Remedy: 1) Check the network controller and its peripheral circuit. 2) Output the NIC Config Page and check the NIC version. 3) Replace the MFPcnt PWB.
  • Code: CE-02
  • Description: Not-specified mail/FTP server error
    The specified mail server, FTP server, and SMB server are not found
  • Causes:
  • Remedy: Case 1 Cause Network cable connection trouble Check and remedy Check to insure that the network cable is securely connected. Case 2 Cause Network setup trouble Check and remedy 1) Check that the connected network supports TCP/ IP protocol. 2) Check from Web page that the Primary/ Secondary E-mail Server Address or the FTP server/Desktop PC/SMB server address as the destination is properly set. 3) When the above address is described with the Hostname, check that the DNS server is properly set or not. Case 3 Cause SMTP server/FTP server/NST/SMB server trouble Check and remedy Check the SMTP server/FTP server/NST/SMB server for any trouble.
  • Code: CE-03
  • Description: Communication error in image send
    The specified server does not respond during image send.
  • Causes: Network cable connection trouble SMTP server/FTP server/NST/SMB server trouble
  • Remedy: Case 1 Cause Network cable connection trouble Check and remedy Check to insure that the network cable is securely connected. Case 2 Cause SMTP server/FTP server/NST/SMB server trouble Check and remedy Check the SMTP server/FTP server/NST/SMB server for any trouble.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us