Description: Linear Encoder Setup has not been done.
Causes: Linear Encoder Setup has not been done. Linear Encoder Setup is ended before it is completed.
Remedy: Carry out Linear Encoder Setup in service menu.
Code: 0109
Description: Even though the machine carries out the regular movement, the output of the Wiper Sensor does not reach the expected value.
Causes: Wiper Motor error Defect of Wiper Unit Defect of Wiper Sensor Cut-line or short-circuit of cable and Flexible cable
Remedy: Wiper Motor Replacement Wiper Unit Replacement Wiper Sensor Replacement Cable and Flexible cable Replacement
Code: 0110
Description: Input value from Linear Encoder is not changed by the Linear Encoder origin setup. When Motor stops during printing, expected movement is not completed on some head.
Causes: Read error of Linear Encoder. Read error of Encoder on Scan Motor side. Belt is not fixed to Head Carriage firmly.
Remedy: Confirm whether Encoder Scale is between the slit of Encoder Module in a whole width of the machine. Check cable connection between Linear Encoder Board and Main Board. Confirm connection between Belt and Carriage. Linear Encoder replacement Scan Motor replacement Main Board replacement
Code: 0111
Description: This error occurs when the machine performs the Auto Crop Mark Detection
Causes: Crop-Cut Adjustment in the Service menu has not been performed
Remedy: Carry out Crop-Cut Adjustment in service menu.
Code: 0112
Description: Communication error with Cartridge IC driver
Causes: Cartridge IC driver is broken. Cartridge IC driver cable has short circuited or cut-line.
Remedy: Ink cartridge IC sensor replacement
Code: 0130
Description: There is a problem with Thermistor for Print Heater
Causes: Thermistor cable has short circuited or cutline.
Remedy: Check cable connection around Thermistor. Thermistor replacement