Description: Communication Error between TR and Interface Accessaries
Causes: • If a communication error has occurred between the CPU and the interface accessaries.
Remedy: Turn Power SW OFF & ON.
Code: E10
Description: Shading Error
Causes: • If the Shading compensation is not made.
Remedy: Turn Power SW OFF & ON.
Code: E13
Description: Cutter Motor Lock
Causes: • If the Cutter position sensor is not turned OFF within 75 ms after the Cutter motor is activated. • If the Cutter position switch is not pressed within 450 ms after the Cutter motor is activated.
Remedy: Drum Set Sensor OFF & ON.
Code: E14
Description: Master Removal Motor Lock
Causes: • If excessive current is detected 0.3 seconds consecutively after the Master removal motor is activated.
Remedy: Press ALL RESET button.
Code: E15
Description: Master Tension Plate Lock
Causes: • If the light path of the Master tension plate sensor is not blocked within 384 pulse rotation of the Read pulse motor rotated in the reverse direction. • If master loading error is detected at Drum angle 79° and if the Master tension plate sensor is blocked.
Remedy: Press ALL RESET button.
Code: E16
Description: Inking Motor Lock
Causes: • If excessive current is detected 0.3 seconds consecutively after the Inking motor is activated.