Description: Paper Jam in the Second Paper Feed Area
Causes: • If the Paper receiving sensor does not find paper when the Drum is at Position-A during the printing operation and the Paper sensor finds a paper at next Drum Position-A.
Remedy: Press ALL RESET button. • Remove the jammed paper.
Code: C32
Description: Paper Jam in the Paper Receiving Area
Causes: • If the status of the Paper receiving sensor does not change from detecting paper to not detecting from one Drum Position-A to the next during printing.
Remedy: Press ALL RESET button. • Remove the jammed paper.
Code: C33
Description: Paper Jam in the First Paper Feed Area
Causes: • If the Paper sensor does not detect paper at Drum angle 135° within three Drum rotations during printing.
Remedy: Press ALL RESET button.
Code: C34
Description: Paper Jam on the Drum
Causes: • If the Paper receiving sensor does not detect paper at one Drum Position-A and the Paper sensor detects paper at next Drum Position-A.
Remedy: Drum set sensor OFF & 2 seconds later ON, or press ALL RESET button.
Code: C37
Description: Original Jam at Entrance
Causes: • During the Original set movement, if the Original IN sensor does not detect Original (sensor light not reflected) within 1712 pulses after the Read pulse motor activates. • During the Original set movement, if the Original IN sensor stops detecting the Original before the Read pulse motor activates 347 pulses.
Remedy: ADF set sensor OFF & ON.
Code: C38
Description: Original Jam or Oversize
Causes: • During the Original scanning, if the Original IN sensor keeps detecting Original (sensor light reflected) and does not stop detecting within 4945 pulses after the Read pulse motor activates.