Description: SIPU Error 4: Cetus Configuration Error At power on, or when the machine returned from energy save mode, Cetus configuration failed after three attempts within 810 ms
Causes: • SIPU defective
Remedy:
Code: 186
Description: Gray Balance Adjustment Error The value for gray balance was detected out of range after gray adjustment.
Causes: If cycling the machine power off/on does not solve the problem: • Clean the platen white plate • Clean the exposure glass • CIS-SIF harnesses loose, broken, defective • SIF-SIPU harnesses loose, broken, defective • SIF defective • CIS defective • SIPU defective
Remedy:
Code: 300
Description: Charge Corona Output Error After sampling at 10 ms intervals, the charge-corona feedback voltage remained less than 0.5 V for more than 200 ms.
Causes: • Charge corona unit leakage • High voltage cable defective • Corona wire dirty or broken • CGB power pack fuse, connections loose, broken, or defective
Remedy:
Code: 305
Description: Charge Corona Wire Cleaner Error The charge wire cleaner did not: (1) come from the home position within 5 s, or (2) did return to the home position within 3.75 s due to wire cleaner overload.
Causes: • Cleaner unit blocked or damaged • Until replacement parts become available, set SP2804 to "0" to disable the chargecorona cleaning function so the machine can operate.
Remedy:
Code: 392
Description: Development Bias Error The development bias feedback voltage was less than 0.3 V for longer than 200 ms while the PWM duty value was more than 5% (indicating a development bias leak).
Causes: • Bias terminal damaged • High voltage cable damaged, defective • CGB power pack defective
Remedy:
Code: 400
Description: ID Sensor Auto Adjustment Error Vsg did not reach 4 ±0.2 V when the ID sensor was initialized with SP3001-2.
Causes: • ID sensor dirty • ID sensor harness, connector loose, disconnected, damaged, defective • ID sensor defective • MCU defective • Development unit defective • CGB power pack defective