Description: The Registration Sensor did not detect paper within a predetermined time after paper started feeding. (Sheet Bypass)
Causes:
Code: J01
Description: The Registration Sensor did not detect paper within a predetermined time after the Paper Feed Roller started rotating. (1st Feeder Unit)
Causes:
Code: J02
Description: The Registration Sensor does not detect paper within a predetermined time after the Paper Feed Roller started rotating. (2nd Feeder Unit)
Causes:
Code: J43
Description: The Exit Sensor does not detect paper within a predetermined time after the Fuser Unit Paper Exit Sensor is activated.
Causes:
Code: J44
Description: The Exit Sensor keeps detecting paper after a predetermined time.
Causes:
Code: J70
Description: Read Point Sensor does not go ON within 10 seconds after the original starts feeding. (Information Code 030 is printed on the Transaction Journal instead.)