OKI MPS4200mb
Error Codes List page 8
|
- Code: 251
- Display: Inspection is required.
251 : Error - Description: SD card erasure error
- Remedy:
- Code: 802 ... 808
- Display: PRESS POWER SW FOR 5SEC
Error : 802
Error : 803
Error : 805
Error : 807
Error : 808 - Description: SU Exception
- Remedy: Does the error occur again? Yes Turn off and on the MFP. Replace the SU board
- Code: 811, 812, 813
- Display: PRESS POWER SW FOR 5SEC
Error : 811
Error : 812
Error : 813 - Description: SU Communication Error
Communication error between the Controller and the Scanner Unit is detected. - Remedy: Communication error between the Controller and the Scanner Unit is detected. Turn off and on the MFP.
- Code: 814
- Display: PRESS POWER SW FOR 5SEC
Error : 814 - Description: SU FW Removed
It is an error to notify that SU FW was erased by special key operation from a panel. - Remedy: It is an error to notify that SU FW was erased by special key operation from a panel.
- Code: 890
- Display: PRESS POWER SW FOR 5SEC
Error : 890 - Description: SU System Memory Overflow
- Remedy: Does the error occur again? Yes Turn off and on the MFP. Replace the SU board
- Code: 899
- Display: Power OFF/ON
Error : 899 - Description: CU Disconnect
- Remedy:
In the situation that communication between CU and SU was able to establish, SU FW detected that CU FW had disappeared from a communications path (an USB line).