Description: Scanner manually disabled The scanner has been manually disabled
Remedy: Enter the configuration mode to re-enable the scanner.
Code: 840.02
Description: Scanner auto disabled The scanner has automatically been disabled by the controller
Remedy: Enter the configuration mode to re-enable the scanner.
Code: 841.xx
Description: Scanner image pipeline failure The scanner image ASIC has failed
Remedy: 1. Check all connections on the ADF controller card assembly. 2. Replace the scanner controller card assembly if problem remains.
Code: 842.xx
Description: ADF communication failure The ADF controller card has lost communication with the system.
Remedy: 1. Check all connections on the ADF controller card assembly. 2. Replace the ADF controller card assembly if problem remains.
Code: 843.xx
Description: Scanner carriage mechanical failure The scanner carriage home position detection has failed.
Remedy: 1 Check the sensor (scanner HP) for proper installation. Is the above component properly installed? Go to step 2. Reinstall the sensor (scanner HP) 2 Check the sensor (scanner HP) for proper operation. 1. Enter the diagnostic mode 2. Select Scanner tests 3. Select Sensor tests 4. Observe the line item “Scanner HP” Does the display on the operator panel change every time the sensing area of the above sensor is interrupted or blocked? The sensor is working properly. Go to step 3. 3 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the sensor (scanner HP). Go to “Sensor (scanner HP) assembly w/ bracket removal (models X651, X652, X654, X656 & X658)”. Replace the connection.
Code: 844.xx
Description: Scanner exposure lamp failure The flatbed scanner exposure lamp has failed.