Description: Fuser Life Warning - Fuser printed more than 200,000 sheets of paper.
Remedy: FIP1.17 Possible causative parts: FUSER ASSY HARNESS ASSY FUSER HVPS/MCU 1 Checking FUSER ASSY Does Error still occur, after installing a new FUSER ASSY and sending RESET FUSER LIFE WARNING command? Checks by sending RESET FUSER LIFE WARNING Command from Controller section to MCU section of HVPS/MCU, using Chapter 2 Diagnostic [FUSER WARNING COUNT RESET]. Replace HVPS/MCU. End of work
Code: 16-1
Description: Face Up Tray Fail - Face Up Tray is not correctly installed in Duplex or OCT mode.
Remedy: FIP1.44 Possible causative parts: HVPS/MCU SENSOR FACE UP OPEN GATE FU LEVER GATE FU 1 Checking Actuator for operation Does ACTUATOR FULL STACK in GATE FU move smoothly, when moving LEVER GATE FU up and down? With tool Go to step 2. Without tool Go to step3. Replace GATE FU. 2 Checking SENSOR FACE UP for operation Remove EP CARTRIDGE. Does the number of Sensor/Switch Check increase by one, every time moving LEVER GATE FU up and down? Checks by Chapter 2 Diagnostic [Sensor/Switch Check]. Go to step 3. Go to FIP2.45 SENSOR FACE UP OPEN. 3 Checking SENSOR FACE UP OPEN for operation Replace SENSOR FACE UP OPEN. Does the problem still occur, after replacing SENSOR FACE UP OPEN? Replace HVPS/MCU. End of work
Code: 16-3
Description: Option Tray Unit Fail - Option Tray is not installed when Option Tray is selected.
Remedy:
Code: 16-4
Description: Full Stack (500 Paper Exit) - 500 Paper Exit became Full Stack.
Remedy: FIP1.45 Possible causative parts: SENSOR FULL STACK ACTUATOR FULL STACK HVPS/MCU 1 Checking ACTUATOR FULL STACK for operation Does ACTUATOR FULL STACK in paper feed out section move smoothly? With tool Go to step 2. Without tool Go to step3. Replace ACTUATOR FULL STACK. 2 Checking SENSOR FULL STACK for operation (1) Remove EP CARTRIDGE. Does the number of Sensor/Switch Check increase by one, every time pushing and releasing ACTUATOR FULL STACK? Checks by Chapter 2 Diagnostic [Sensor/Switch Check]. Go to step 3. Go to FIP2.46 SENSOR FULL STACK. 3 Checking SENSOR FULL STACK for operation (2) Replace SENSOR FULL STACK. Does the problem still occur, after replacing SENSOR FULL STACK? Replace HVPS/MCU. End of work
Code: 16-5
Description: Full Stack (OCT) - Option OCT became Full Stack.
Remedy:
Code: 16-5
Description: Full Stack (OCT) - Option OCT became Full Stack.