0

USD 0.00

Discount 0.0%
Parts List

0

Mimaki UJF605CII

Error Codes List page 2

All About this machine

Error Code:

page

Code: 06
Display: ERROR 06 UHC 02 nnnn
Description: . UHC status ready turned OFF. n=UHC No.1-8
Remedy: 1) Check that UHCII PCB is inserted securely in the main PCB. 2) Turn ON/OFF the plotter and check the problem disappears. 3) Upgrade the firmware.

Code: 06
Display: ERROR 06 UHC 03 nnnn
Description: . Waiting for UHC bus busy cancellation. 5sec timeout. n=UHC No.1-8
Remedy: 1) Check that UHCII PCB is inserted securely in the main PCB. 2) Turn ON/OFF the plotter and check the problem disappears. 3) Upgrade the firmware.

Code: 06
Display: ERROR 06 UHC 04 nnnn
Description: . Waiting for UHC status Read. 5sec timeout. n=UHC No.1-8
Remedy: 1) Check that UHCII PCB is inserted securely in the main PCB. 2) Turn ON/OFF the plotter and check the problem disappears. 3) Upgrade the firmware.

Code: 06
Display: ERROR 06 UHC 05 nnnn
Description: . Waiting for UHC response. 5sec timeout. n=UHC No.1-8.
Remedy: 1) Check that UHCII PCB is inserted securely in the main PCB. 2) Turn ON/OFF the plotter and check the problem disappears. 3) Upgrade the firmware.

Code: 06
Display: ERROR 06 UHC 06 nnnn
Description: . UHC status: Receiving FIFO full. Waiting for cancellation. 10sec timeout. n=UHC No.1-8
Remedy: 1) Check that UHCII PCB is inserted securely in the main PCB. 2) Turn ON/OFF the plotter and check the problem disappears. 3) Upgrade the firmware.

Code: 06
Display: ERROR 06 UHC 07 nnnn
Description: . UHC status: Waiting for band memory clear. 10msec timeout. n=UHC No.1-8
Remedy: 1) Check that UHCII PCB is inserted securely in the main PCB. 2) Turn ON/OFF the plotter and check the problem disappears. 3) Upgrade the firmware.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home

Send message to us