Description: 975.xx Network Error The system detected an unrecognizable network port 976.xx Network Error The system detected an unrecoverable software error in network port 978.xx Network Error The system detected a bad checksum while programming network port 979.xx Network Error The flash parts failed while programming a network port
Remedy:
Code: 982.04
Description: Output option communication failure. An output option was not fully seated onto the printer or has been removed while the main power is turned on.
Remedy: 1. Turn the main power off. 2. Remove and reinstall the output option. 3. Turn the main power back on. 4. Check all output option interface connections if problem remains.
Code: 982.07
Description: Too many options installed Exceeded the maximum number of input or output options.
Remedy: Remove the appropriate input or output options.
Code: 990.00
Description: Output option equipment check. Output option rear door not fully closed.
Remedy: Close the rear door on all output options.
Code: 990.51
Description: HCIT tray lift motor PWM underflow error The HCIT tray lift motor does not operate at the specified speed reported by tray x
Remedy: 1. Check for obstruction in the HCIT tray lift area. 2. Check the connections on the HCIT tray lift motor assembly for proper connection. 3. Replace the HCIT tray lift motor drive motor assembly if problem remains.
Code: 990.53
Description: HCIT tray lift motor ramp error The HCIT tray lift motor does not reach the specified speed at the specified time.
Remedy: 1. Check for obstruction in the HCIT tray lift area. 2. Check the connections on the HCIT tray lift motor assembly for proper connection. 3. Replace the HCIT tray lift drive motor assembly if problem remains.