Description: Insufficient Memory Held Jobs may be lost
Remedy: This message displays when there is not enough memory available to continue processing a job and Print and Hold feature is in use. The printer frees memory by deleting the oldest Reserve Print and Verify Print jobs. It deletes only the amount needed to continue the incoming job. Some or all of the jobs may not be restored. If, while printing the current job, it runs out of memory again, another message is not posted. • Press Go to clear the message. Some of the Print and Hold jobs on the disk will not be restored. They remain on the disk, but cannot be accessed. • Press Menu until Busy/Waiting appears. The function, Reset Printer, may be available.
Code: 38
Description: Memory Full
Remedy: This message displays when the printer is processing an incoming job and there is insufficient memory available to continue processing the job. The following actions may be taken: • Press Go to clear the message. Perform the defragment operation: – Simplify the print job. –Delete fonts, macros, and other data in RAM – Install additional memory • Press Menu to display Busy/Waiting. The following functions may be available: –Cancel Job –Reset Printer
Code: 39
Description: Complex Page
Remedy: This message displays when the page is too complex to print. The following actions may be taken: • Press Go to clear the message and continue the job. Some data loss may occur. Simplify the print job and reprint, if necessary. • Press Menu until Busy/Waiting appears. The following selections are possible: –Cancel Job –Reset Printer
Code: 40
Description: Unsupported Firmware Card
Remedy: A firmware card containing network code is installed on a non-network printer or a nonnetwork card is installed on a network printer. Press and hold Go while powering the printer. The unsupported card will be ignored. Remove the card.
Code: 41
Description: Unsupported Firmware Card
Remedy: A firmware card containing unsupported code is detected. Press and hold Go while powering the printer. The unsupported card will be ignored. Remove the card.
Code: 50
Description: PPDS Font Error
Remedy: This message displays when the PPDS interpreter has encountered a font error. Note: This error may only occur when the printer is formatting PPDS print data. The following actions may be taken: • Press Go to clear the message and continue processing the job. • Press Menu until Busy/Waiting appears. The following are available: –Cancel Job –Reset Printer