Description: Scanner carriage problem • The home position is not correct when the power is turned on or copy-ing the document placed on the con-tact glass.
Causes: Poor contact of the connector ter-minals. Defective scanner home position sensor. Defective engine board (KP-5061) or scanner board (KP-5063). Defective scanner motor.
Remedy: Check the connection of connectors YC10, 11 on the engine board (KP-5061) and the continuity across the connector terminals. Repair or replace if necessary. Replace the scanner home position sensor. Replace the engine board (KP-5061) or scanner board (KP-5063) and check for correct operation. Replace the scanner motor.
Code: C3200
Description: Exposure lamp problem • In indicator check before starting copying, the average value in scanning of the shading plate with the CCD is 128 or more.
Causes: Defective scanner board (KP-5063). Defective exposure lamp or inverter board. Incorrect shading position. Poor contact of the connector terminals.
Remedy: Replace the scanner board (KP-5063) and check for correct operation. Replace the exposure lamp or inverter board. Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the scanner home position sensor. Check the connection of connector YC-6 on the scanner board (KP-5063), and the continuity across the connector terminals. Repair or replace if necessary.
Code: C3300
Description: Optical system (AGC) problem • After AGC, correct input is not obtained at CCD.
Remedy: Replace the exposure lamp or inverter board. Replace the scanner board (KP-5063) and check for correct operation. Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the scanner home position sensor.
Code: C4000
Description: Polygon motor synchronization problem • The polygon motor does not reach the stable speed within 15 s of the START signal turning on.
Causes: Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective engine board (KP-5061).
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Replace the LSU. Replace the engine board (KP-5061) and check for correct operation.
Code: C4010
Description: Polygon motor steady-state problem • The polygon motor rotation is not stable for 5 s after the polygon motor rotation has been stabilized.
Causes: Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective engine board (KP-5061).
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Replace the LSU. Replace the engine board (KP-5061) and check for correct operation.
Code: C4200
Description: BD steady-state problem • The MIC detects a BD error for 600 ms after the polygon motor rotation has been stabilized.