Causes: Cyan drum motor error (Failure in drum motor initial operation) The target speed was not reached within a specified time after startup of the motor.
Remedy: Check the contact of the connector between the drum motor (J515) and the DC controller PCB (J81). Replace the drum motor. Replace the main drive assembly.
Code: E012-0007
Description: ITB motor or drum motor failure
Causes: Cyan drum motor error (Failure in drum motor rotation) The motor rotated out of the target speed during rotation after the target speed was reached.
Remedy: Check the contact of the connector between the drum motor (J515) and the DC controller PCB (J81). Replace the drum motor. Replace the main drive assembly.
Code: E012-0008
Description: ITB motor or drum motor failure
Causes: Black drum motor error (Failure in drum motor initial operation) The target speed was not reached within a specified time after startup of the motor.
Remedy: Check the contact of the connector between the drum motor (J515) and the DC controller PCB (J81). Replace the drum motor. Replace the main drive assembly.
Code: E012-0009
Description: ITB motor or drum motor failure
Causes: Black drum motor error (Failure in drum motor rotation) The motor rotated out of the target speed during rotation after the target speed was reached.
Remedy: Check the contact of the connector between the drum motor (J515) and the DC controller PCB (J81). Replace the drum motor. Replace the main drive assembly.
Code: E014-0000
Description: Fixing motor failure
Causes: Fixing motor startup error The target speed was not reached within a specified time after startup of the motor.
Remedy: Check the contact of the connector between the fixing motor (J516) and the DC controller PCB (J81). Check the gear between the fixing motor and the fixing assembly. Replace the fixing motor.
Code: E014-0001
Description: Fixing motor failure
Causes: Fixing motor rotation error The motor rotated out of the target speed during rotation after the target speed was reached.
Remedy: Check the contact of the connector between the fixing motor (J516) and the DC controller PCB (J81). Check the gear between the fixing motor and the fixing assembly. Replace the fixing motor.