PrintCopy.info service

Sharp ARM256

Error Codes List page 1

  • Code: A0-01
  • Description: Security incompatibility error
    When the PCL or the FAX board is installed, it does not match with compatible/incompatible setup of the MCU board security.
  • Causes: The security compatibility/incompatibility of the installed PCL or FAX board does not match with that of the MCU board.
  • Remedy: Cheek the security compatibility/ incompatibility of each board. Match the security compatibility/incompatibility of the boards.
  • Code: E1-00
  • Description: MCU-IMC communication trouble
    Communication establishment error/ framing/parity/protocol error
  • Causes: IMC PWB connector disconnection Motherboard connector pin breakage IMC PWB ROM defect, data failure
  • Remedy: Check the connectors of the IMC PWB and MCU PWB. Check the grounding of the copier. Check the ROM of the IMC PWB.
  • Code: E1-10
  • Description: IMC PWB trouble
    Communication trouble between MCU and IMC PWB
  • Causes: IMC PWB connector disconnection Motherboard connector pin breakage IMC PWB ROM defect, data failure
  • Remedy: Replace the IMC PWB
  • Code: E1-11
  • Description: IMC board ASIC error
    ASIC abnormality on IMC board
  • Causes: IMC board abnormality
  • Remedy: Replace the IMC PWB
  • Code: E1-12
  • Description: IMC board CODEC IC error
    CODEC IC (JBIG chip) abnormality on IMC board
  • Causes: IMC board abnormality
  • Remedy: Replace the IMC PWB
  • Code: E1-13
  • Description: IMC board flash ROM error
    Flash ROM abnormality on IMC board
  • Causes: IMC board abnormality
  • Remedy: Replace the IMC PWB. When the program download is abnormally terminated, a error may occur. In this case, download the program again.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us