PrintCopy.info service

Panasonic DPMB300

Error Codes List page 1

  • Code: 01
  • Display: Call service 1
  • Description: • Polygon motor error.
    Polygon motor inside the LSU does not rotate.
  • Code: 02
  • Display: Call service 2
  • Description: • Laser beam error. Replace LSU unit.
    Synchronous signal out of the LSU cannot be detected.
  • Code: 03
  • Display: Call service 3
  • Description: • Fuser unit cannot heat up. Replace fuser unit.
    Temperature of the fuser does not rise up to or exceed a constant temperature.
  • Code: 04
  • Display: Call service 4
  • Description: • Fuser fan motor error. Replace fan motor.
    Fuser FAN does not rotate or the rotation of the Fuser FAN cannot be detected normally.
  • Code: 05
  • Display: Call service 5
  • Description: • Print motor error. (only for DC motor)
    The main DC motor does not rotate properly or the rotation detection signal (LD signal) is not
    detected during motor rotation.
  • Code: 06
  • Display: Call service 6
  • Description: • Charge unit error (An error occurred in the Charge unit including High voltage unit. (Also the Charger went wrong.))
    Indicates that abnormal charge voltage is output from the high voltage unit.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us