PrintCopy.info service

Lexmark T430

Error Codes List page 1

  • Code: 31
  • Description: Missing or Defective Cart.
  • Remedy: The cartridge may be missing and the front door closed. Return the cartridge. Or, the cartridge may be defective. Replace the cartridge.
  • Code: 32
  • Description: Unsupported Print Cartridge
  • Remedy: Error 32 displays when the top cover is closed and an unsupported print cartridge is detected. It may take the printer 10-20 seconds to determine if the print cartridge is supported. Depending on the setting of the Machine Class ID, the printer may be allowed to print pages during this 10-20 second interval. If pages are allowed to print, then they are not reprinted once a good print cartridge is inserted. Replace the cartridge.
  • Code: 34
  • Description: Short Paper
  • Remedy: The printer determines the paper length is too short to print the formatted data. This occurs when the printer does not know the actual paper size loaded in the tray. Make sure the Paper Size setting is correct for the size paper that is being used. The following actions may be taken: • Press Go to clear the message and continue printing. • Press Menu until Busy/Waiting displays. Select one of the following: –Cancel Job –Reset Printer
  • Code: 35
  • Description: Res Save Off Deficient Memory
  • Remedy: The printer lacks sufficient memory to enable Resource Save. The following actions may be taken: • Press Go to clear the message. The printer disables Resource Save. • Install additional memory. • Set link buffers to Auto, return to Ready and enable Resource Save and reset the link buffers.
  • Code: 37
  • Description: Insufficient Collation Area
  • Remedy: This message displays when the printer memory is insufficient to perform the Flash Memory Defragment operation. Note: This message is posted prior to the actual start of the defragment operation. The printer code determines if enough printer memory is available to complete the defragment operation. The user should not be concerned with losing resources stored in the flash option. The following actions may be taken: • Press Go to clear the message. • Press Menu until Busy/Waiting appears. The following actions are available: –Cancel Job –Reset Printer
  • Code: 37
  • Description: Insufficient Defrag Memory
  • Remedy: This message displays when the printer memory is fragmented. Defragmentation is required and additional memory is required to complete the task. • Press Go to clear the message. Defragmentation will not continue and no changes are made to memory and no resources are lost. • Press Menu until Busy/Waiting appears. The following functions may be available: –Cancel Job –Reset Printer The user may clear memory for a defragmentation by: • Deleting fonts, macros, and other data in RAM. • Installing additional memory.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us