Kyocera TASKalfa 2550ci Error Codes List page 1 from 19

Exploded Views and Parts List Free!

  • Code: 0030
  • Description: FAX control PWB system error
    Processing with the fax software was disabled due to a hardware problem.
  • Causes: Defective PWB.
  • Remedy: Replace the fax control PWB and check for correct operation.
  • Code: 0070
  • Description: FAX control PWB incompatible detection error
    In the initial communication with the FAX control PWB, the normal communication command is not transmitted.
  • Causes: Defective FAX software. Defective PWB.Defective PWB.
  • Remedy: Defective FAX software. Install the fax software.
    Defective PWB. Replace the fax control PWB and check for correct operation.
  • Code: 0100
  • Description: Backup memory device error
  • Causes: Defective flash memory. Defective PWB.
  • Remedy: Replace the main PWB and check for correct operation.
  • Code: 0120
  • Description: MAC address data error
    The data includes an invalid MAC address.
  • Causes: Defective flash memory. Defective PWB.
  • Remedy: Defective flash memory. Replace the main PWB and check for correct operation.
    Defective PWB. Replace the engine PWB and check for correct operation.
  • Code: 0150
  • Description: Backup memory read/write error (engine PWB)
    Detecting engine PWB EEPROM communication error.
  • Causes: The engine PWB EEPROM was improperly installed. Defective PWB. Defective EEPROM.
  • Remedy: The engine PWB EEPROM was improperly installed. Check the EEPROM is properly installed and remedy if necessary.
    Defective PWB. Replace the engine PWB and check for correct operation.
    Defective EEPROM. Contact the Service Administrative Division.
  • Code: 0160
  • Description: Backup memory data error (engine PWB)
  • Causes: Defective flash memory. Defective PWB.
  • Remedy: Replace the engine PWB and check for correct operation.
  • Code: 0170
  • Description: Billing counting error
    A checksum error is detected in the main and engine backup memories for the billing counters.
  • Causes: Data in the EEPROM. Defective PWB.
  • Remedy: Data in the EEPROM . Contact the Service Administrative Division.
    Defective PWB. Replace the main PWB or the engine PWB and check for correct operation.
  • Code: 0180
  • Description: Machine number mismatch
    Machine number of main and engine does not match.
  • Causes: Data in the EEPROM.
  • Remedy: Contact the Service Administrative Division.