PrintCopy.info service

Konica-Minolta Di181

Error Codes List page 1

  • Code: C0000
  • Description: Lower Drive Motor’s failure to turn
    The Lock signal remains HIGH for a continuous 1-sec. or more period 1sec. after the motor is energized.
  • Remedy: 1 Lower Drive Motor turns when the Start key is pressed NO Correct drive coupling. 2 Lower Drive Motor operation: the voltage across PJ16A-5 on the Master Board and GND is DC5V (motor deenergized) and DC0V (motor energized) when the Start key is pressed. NO Change Master Board. 3 The voltage across PJ16A-4 on the Master Board and GND is DC5V (motor deenergized) and DC0V (motor energized) when the Start key is pressed. YES Change Master Board. NO Change motor.
  • Code: C0001
  • Description: Lower Drive Motor turning at abnormal timing
    The Lock signal remains LOW for a continuous 1-sec. or more period 1sec. after the motor is deenergized.
  • Remedy: 1 Lower Drive Motor operation: the voltage across PJ16A-5 on the Master Board and GND is DC5V after the malfunction has been reset. NO Change Master Board. 2 The voltage across PJ16A-4 on the Master Board and GND is DC5V after the malfunction has been reset. YES Change Master Board. NO Change motor.
  • Code: C0010
  • Description: Upper Drive Motor’s failure to turn
    The Lock signal remains HIGH for a continuous 1-sec. or more period 1sec. after the motor is energized.
  • Remedy: 1 Upper Drive Motor turns when the Start key is pressed NO Correct drive coupling. 2 Upper Drive Motor operation: the voltage across PJ11A-9 on the Master Board and GND is DC5V (motor deenergized) and DC0V (motor energized) when the Start key is pressed. NO Change Master Board. 3 The voltage across PJ11A-8 on the Master Board and GND is DC5V (motor deenergized) and DC0V (motor energized) when the Start key is pressed. YES Change Master Board. NO Change motor.
  • Code: C0011
  • Description: Upper Drive Motor turning at abnormal timing
    The Lock signal remains LOW for a continuous 1-sec. or more period 1sec. after the motor is deenergized.
  • Remedy: 1 Upper Drive Motor operation: the voltage across PJ11A-9 on the Master Board and GND is DC5V after the malfunction has been reset. NO Change Master Board. 2 The voltage across PJ11A-8 on the Master Board and GND is DC5V after the malfunction has been reset. YES Change Master Board. NO Change motor.
  • Code: C004A
  • Description: Optical Section Cooling Fan Motor’s failure to turn
    The Lock signal remains HIGH 1sec. after the motor is energized.
  • Remedy: 1 Optical Section Cooling Fan Motor operation: the voltage across PJ10A-2 on the Master Board and GND is DC24V (motor deenergized) and DC0V (motor energized) when the Start key is pressed. NO Change Master Board. 2 The voltage across PJ10A-3 on the Master Board and GND is DC24V (motor deenergized) and DC0V (motor energized) when the Start key is pressed. YES Change Master Board. NO Change motor.
  • Code: C004b
  • Description: Optical Section Cooling Fan Motor turning at abnormal timing
    The Lock signal remains LOW 1sec. after the motor is deenergized.
  • Remedy: 1 Optical Section Cooling Fan Motor operation: the voltage across PJ10A-2 on the Master Board and GND is DC24V after the malfunction has been reset. NO Change Master Board. 2 The voltage across PJ10A-3 on the Master Board and GND is DC24V after the malfunction has been reset. YES Change Master Board. NO Change motor.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us