HP DesignJet 1055CM
- Code: 06030A
- Description: Error in finding the Mark Encoder.
- Remedy: • Clean the Mark Encoder if necessary (use the Overdrive Cleaning Utility to position the Mark Encoder).• Clean the Line Sensor (located on the Carriage Assembly).• Perform the Line Sensor Calibration.• Perform the Mark Encoder Calibration.• Replace the Trailing Cable.• Replace the Carriage Assembly.• If the Error Code continues, replace the Electronics Module
Error Code | |
Service Mode, Troubleshooting | |
Parts Catalog | |
Compatibility | |
Downloads Files | |
Home |
Send message to us