PrintCopy.info service

Canon iR1023

Error Codes List page 1

  • Code: 0000
  • Description: Unknown jam
    - Other errors
  • Remedy:
  • Code: 0007
  • Description: Initial stationary SR2002, SR2003, SR2004
    - Paper is detected in the transport path before the ADF starts initial operation.
  • Remedy:
  • Code: 0008
  • Description: Document edge sensor delay jam SR2002
    - The document edge sensor does not detect paper when the paper has been fed by the predetermined distance since reception of a pickup request.
  • Remedy:
  • Code: 0009
  • Description: Document edge sensor stationary jam SR2002
    - The trailing edge of paper is not detected when the paper has been fed by the predetermined distance since detection of it by the document edge sensor
  • Remedy:
  • Code: 000a
  • Description: Paper absence (Pull out the document.) SR2001
    - The Document set sensor has been held off since start of pickup.
  • Remedy:
  • Code: 000c
  • Description: Delivery delay jam SR2002
    - In case the internal software signal "Delivery Sensor OFF" set in the system cannot be detected, when the leading edge of paper is detected by the document edge sensor and fed the prescribed distance, and after the paper's trailing edge is detected.
  • Remedy:
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us