PrintCopy.info service

Canon MF5750

Error Codes List page 1

  • Code: #001
  • Description: Document has jamed
    The document is trapped in the feeder.
  • Remedy: - Remove the document, and try again.
  • Code: #003
  • Description: Document is too long, or page time-over
    The length of a single page is too long.
  • Remedy: - Using a copying machine, make copies of the document, and transmit the copies separately.
  • Code: #005
  • Description: Initial identification (T0/T1) time-over
    The tone/pulse setting is wrong.
  • Remedy: - Make the correct tone/pulse setting.
  • Code: #009
  • Description: Recording paper has jammed or the recording paper has run out
    The recording paper is trapped.
  • Remedy: Remove the trapped recording paper.
  • Code: E000
  • Description: Fixing Unit Failure
  • Remedy: 1) Turn the power off and on.
    2) Make sure that the fixing unit and DCNT board (J505) are properly connected.
    3) Make sure that the fixing unit and power supply board (CN2) are properly connected.
    4) Make sure connections of the boards (power supply board (CN101), DCNT board (J501), and SCNT board
    5) Replace the fixing unit.
  • Code: E100
  • Description: Laser/Scanner Unit Failure
  • Remedy: 1) Turn the power off and on.
    2) Make sure that the Laser/Scanner unit (J801) and DCNT board (J503) are properly connected.
    3) Make sure that the Laser/Scanner unit and DCNT board (J504) are properly connected.
    4) Make sure connections of the boards (power supply board (CN101), DCNT board (J501), and SCNT board (J804)).
    5) Replace the Laser/Scanner unit.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us