Canon iR Advance C5235

Henok
Posts: 24
Joined: Mon Feb 01, 2021 12:41 pm

Canon iR Advance C5235

Postby Henok » Thu Feb 04, 2021 11:03 am

How I fix error code E00009-0002 for canon 5235?
Alvaro
Posts: 39
Joined: Sat Oct 21, 2017 9:55 pm

Re: Canon iR Advance C5235

Postby Alvaro » Thu Feb 18, 2021 5:27 am

How to solve error code e000733-0000 on Canon c5235i?
Sunil
Posts: 23
Joined: Mon Feb 01, 2021 1:08 pm

Re: Canon iR Advance C5235

Postby Sunil » Tue Feb 23, 2021 3:31 pm

Alvaro wrote:How to solve error code e000733-0000 on Canon c5235i?

E733-0000
Error in printer communication
Communication with the printer failed at start-up.
Solution:
  1. Check the connector connecting to the Printer.
  2. Check the power of the Printer -> whether to perform initialization at start-up?
  3. Replace the Dcon or the Main controller PCB 2.
Zeeshan
Posts: 25
Joined: Mon Feb 01, 2021 1:03 pm

Re: Canon iR Advance C5235

Postby Zeeshan » Tue Feb 23, 2021 3:34 pm

Henok wrote:How I fix error code E00009-0002 for canon 5235?

E009-0002
Pressure error (it is highly possible that grease is scattered on the surface of the cam.)
Unable to detect stopping of the cam at the specified position even if pressure is applied 10 times.
Solution:
Clean the scattered grease and excess grease on the gear at the rear side of the host machine. Procedure is as follows.
  1. Remove the Fixing Assembly.
  2. Remove the Gear Cover at the rear side of the host machine, and remove the Pressure Release Stopper and the Pressure Release Support Plate (so that the gear is easily cleaned).
  3. Wipe off the scattered grease around the Pressure Release Cam and the Pressure Plate with lint-free paper moistened with alcohol.
  4. Wipe off the excess grease on the side of the gear and the shaft.

Return to “imageRUNNER Advance, iR Advance”

Who is online

Users browsing this forum: No registered users and 1 guest